Car Smoke Leak Detector EVAP Pipe Leak Locator Analyzer
[Wide range of applications] For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.Works on all car makes and models.
[Powerful and easy operation] This smoke machine has its own air pump, it does not rely on other air machine.
Connect the detector with DC12V battery,It can be outputs lots of Smoke within 30 seconds after turning on.
[Advanced technology] It works on the EVAP system (we also have another version that specially designed for EVAP system).
[Overheat & Anti-frost protection] The detector has smart protector. If it exceeds working limit,for e.g over 75℃. It will power off automatically.
[Three-year warranty] As long as the equipment is not damaged by man-made problems, we will renew it for free
Why do you need a smoke leak detector?
》》Because the OBD2 diagnostic instrument only tells you the result and the smoke leak detector tells you the reason.
》》Because 80% of failures are related to pipeline leakage, air or oil pressure leakage can cause car failures.
》》Because the smoke leak detector can perform leak detection on the entire pipeline, visualized operation, all-round, no dead ends, and no leaks are missed.
》》Because s2000 is durable and smoke is harmless.
》》Because the pressure gauge can simply and clearly determine the size of the pipeline leak and repair it in time.
ANCEL S3000/2000/1000 Advanced Technology
▶Crankcase System Test
▶Intake System Test
▶Car Sealing Test
▶Fuel Tank System Test
▶Turbo System Test
▶EVAP System Test
▶Exhaust System Test
▶Various Pipe Fittings Test.
How to do Leakage Test?
1. Fill 20ml test oil to the detector;
2. Disconnect the pipe that needs to be connected with detector;
3. Connect detector with DC 12V battery, device starts to work;
4. The pipe will be filled with smoke, check the leak points.
Independent switch control design
Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil
SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.
Overheat & Anti-frost Protection
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles, ATVS,light trucks and speedboats,Suitable for all car models.
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.
The device can also work normally at -20℃.
Wide Range of Applications
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,SUV,ATVS,Light Turks,Speed Boats.
The difference between S1000 and S2000 and S3000
the function of the Pressure Gauge: We can directly determine whether the pipeline is leaking through the value of the pressure gauge. If the pressure gauge is less than 0.5bar, it can be judged that there is a leak. The smaller the pressure, the greater the leak. At this time, you can find the leak through the smoke leak. Point and fix it in time
The function of FLOW INDICATION: The flow meter is an indicator to intuitively judge whether there is a leak and the size of the leak. When the flow indicator bead is at the bottom of D, it indicates that the pipe is good and there is no leakage. The higher the bead position, the greater the leakage.
NOTE：The function of the flow meter and the pressure meter is the same, which can determine the size of the leakage, so S2000 is sufficient and the most cost-effective