Charger output side and input side
• Microprocessor Control (CPU).
• 7-STAGE AUTOMATIC CHARGING:
• This is a fully automatic battery charger with 7 charge stages.
• Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
• 7-stage chargers are suitable for most battery types including Calcium, Gel AGM, Lithium, LiFePo4, Wet, lead Acid batteries. They may also help restore drained and sulphated batteries.
• Types of batteries: Most types of lead acid batteries including Calcium, Gel AGM, Lithium, LiFePo4, Wet, lead Acid, etc..
• Switchmode technology: Yes
• Polarity protection: Yes
• Output short protection: Yes
• Non battery link protection: Yes
• Over voltage protection: Yes
• Over temperature protection: Yes
• Cooling: Fan
• Input voltage: 100-240V AC, 50-60Hz
• Rated output: 12V 6A 24V 3A
• Minimum start voltage: 8.0V
• Battery range: 6-120Ah
• Thermal protect: 65’C+/-5’C
• Efficiency: App. 85%.
• Compliant standards: CB,CE, IEC60335, EN61000, EN55014
• Dimension (L×W×H): 160×100×62mm
• Weight: 470g
LCD Display: Charge Voltage
LCD Display: Charge CurrentLCD Display: Inside Temperature (allowed tolerance)Reverse connection protection. Display: EROOutput short-circuit protection. Display: ERO
Charging for 12V Motorcycle batteryCharging for 24V battery
Charging for car battery
Repair Mode (Time: 16hours)
An advanced battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated.AC cable length: 90cm, DC cable length: 60cm.